This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1743864545 | 652 Count | 490 Count | 279 Count | 0 VDC | 0 VDC |
1743862744 | 621 Count | 452 Count | 249 Count | 0 VDC | 0 VDC |
1743860944 | 590 Count | 419 Count | 219 Count | 0 VDC | 0 VDC |
1743859143 | 560 Count | 386 Count | 190 Count | 0 VDC | 0 VDC |
1743857342 | 529 Count | 353 Count | 160 Count | 0 VDC | 0 VDC |
1743857329 | 528 Count | 352 Count | 160 Count | 0 VDC | 0 VDC |
1743857076 | 523 Count | 346 Count | 156 Count | 0 VDC | 0 VDC |
1743857004 | 520 Count | 343 Count | 154 Count | 0 VDC | 0 VDC |
1743855357 | 519 Count | 343 Count | 154 Count | 0 VDC | 0 VDC |
1743853557 | 489 Count | 310 Count | 125 Count | 0 VDC | 0 VDC |
1743851756 | 458 Count | 277 Count | 95 Count | 0 VDC | 0 VDC |
1743849955 | 426 Count | 244 Count | 64 Count | 0 VDC | 0 VDC |
1743848155 | 396 Count | 215 Count | 35 Count | 0 VDC | 0 VDC |
1743846353 | 373 Count | 193 Count | 13 Count | 0 VDC | 0 VDC |
1743846137 | 364 Count | 185 Count | 5 Count | 0 VDC | 0 VDC |
1743846128 | 363 Count | 185 Count | 5 Count | 0 VDC | 0 VDC |
1743846023 | 357 Count | 180 Count | 0 Count | 0 VDC | 0 VDC |
1743845039 | 356 Count | 180 Count | 0 Count | 0 VDC | 0 VDC |
1743839444 | 355 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743837644 | 354 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743836717 | 353 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743836684 | 352 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743834883 | 351 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743833082 | 350 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
1743831281 | 349 Count | 177 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)