This is the latest recevied telemetry packets stored in our database for station/object OZ1MAS-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751306023 | 729 Count | 223 Count | 223 Count | 0 VDC | 0 VDC |
| 1751305118 | 728 Count | 223 Count | 223 Count | 0 VDC | 0 VDC |
| 1751304214 | 726 Count | 222 Count | 222 Count | 0 VDC | 0 VDC |
| 1751303310 | 725 Count | 222 Count | 222 Count | 0 VDC | 0 VDC |
| 1751302405 | 723 Count | 221 Count | 221 Count | 0 VDC | 0 VDC |
| 1751301501 | 722 Count | 221 Count | 221 Count | 0 VDC | 0 VDC |
| 1751300596 | 720 Count | 220 Count | 220 Count | 0 VDC | 0 VDC |
| 1751299692 | 719 Count | 220 Count | 220 Count | 0 VDC | 0 VDC |
| 1751298788 | 717 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751297883 | 716 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751296978 | 715 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751296074 | 714 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751295169 | 713 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751294265 | 712 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751293361 | 711 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751292456 | 710 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751291552 | 709 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751290647 | 708 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751289742 | 707 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751288838 | 706 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751287933 | 705 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
| 1751287029 | 704 Count | 219 Count | 219 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)