This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1741792645 | 233 Count | 474 Count | 226 Count | 0 VDC | 0 VDC |
| 1741790844 | 170 Count | 330 Count | 164 Count | 0 VDC | 0 VDC |
| 1741785470 | 384 Count | 871 Count | 378 Count | 0 VDC | 0 VDC |
| 1741783669 | 327 Count | 747 Count | 322 Count | 0 VDC | 0 VDC |
| 1741781869 | 272 Count | 625 Count | 268 Count | 0 VDC | 0 VDC |
| 1741780068 | 203 Count | 492 Count | 200 Count | 0 VDC | 0 VDC |
| 1741778268 | 155 Count | 386 Count | 153 Count | 0 VDC | 0 VDC |
| 1741776467 | 103 Count | 254 Count | 102 Count | 0 VDC | 0 VDC |
| 1741774666 | 48 Count | 125 Count | 48 Count | 0 VDC | 0 VDC |
| 1741772866 | 491 Count | 1012 Count | 486 Count | 0 VDC | 0 VDC |
| 1741771065 | 402 Count | 835 Count | 398 Count | 0 VDC | 0 VDC |
| 1741769264 | 333 Count | 687 Count | 330 Count | 0 VDC | 0 VDC |
| 1741767464 | 273 Count | 552 Count | 271 Count | 0 VDC | 0 VDC |
| 1741765663 | 205 Count | 401 Count | 204 Count | 0 VDC | 0 VDC |
| 1741763863 | 71 Count | 148 Count | 71 Count | 0 VDC | 0 VDC |
| 1741762062 | 435 Count | 1112 Count | 427 Count | 0 VDC | 0 VDC |
| 1741760261 | 377 Count | 977 Count | 370 Count | 0 VDC | 0 VDC |
| 1741758461 | 330 Count | 855 Count | 324 Count | 0 VDC | 0 VDC |
| 1741756660 | 287 Count | 730 Count | 282 Count | 0 VDC | 0 VDC |
| 1741754860 | 227 Count | 589 Count | 223 Count | 0 VDC | 0 VDC |
| 1741753059 | 185 Count | 475 Count | 182 Count | 0 VDC | 0 VDC |
| 1741751259 | 132 Count | 339 Count | 130 Count | 0 VDC | 0 VDC |
| 1741749458 | 88 Count | 226 Count | 87 Count | 0 VDC | 0 VDC |
| 1741747657 | 46 Count | 107 Count | 46 Count | 0 VDC | 0 VDC |
| 1741745857 | 407 Count | 1053 Count | 399 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)