This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1753834658 | 993 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753832857 | 992 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753831056 | 991 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753829255 | 990 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753827455 | 989 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753825654 | 988 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753823853 | 987 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753822052 | 986 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753820252 | 985 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1753818451 | 964 Count | 361 Count | 361 Count | 0 VDC | 0 VDC |
| 1753816650 | 959 Count | 357 Count | 357 Count | 0 VDC | 0 VDC |
| 1753814849 | 958 Count | 357 Count | 357 Count | 0 VDC | 0 VDC |
| 1753813049 | 946 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753809447 | 944 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753807647 | 943 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753805845 | 942 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753802244 | 940 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753800443 | 939 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753798642 | 938 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753796841 | 937 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753795041 | 936 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753793240 | 935 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753791439 | 934 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753789638 | 933 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
| 1753787838 | 932 Count | 346 Count | 346 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)