This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1741794452 | 110 Count | 927 Count | 96 Count | 0 VDC | 0 VDC |
| 1741792651 | 106 Count | 859 Count | 93 Count | 0 VDC | 0 VDC |
| 1741790851 | 99 Count | 804 Count | 87 Count | 0 VDC | 0 VDC |
| 1741789050 | 85 Count | 721 Count | 74 Count | 0 VDC | 0 VDC |
| 1741787250 | 78 Count | 632 Count | 68 Count | 0 VDC | 0 VDC |
| 1741785449 | 73 Count | 587 Count | 64 Count | 0 VDC | 0 VDC |
| 1741783648 | 65 Count | 525 Count | 57 Count | 0 VDC | 0 VDC |
| 1741781848 | 55 Count | 469 Count | 48 Count | 0 VDC | 0 VDC |
| 1741780047 | 47 Count | 410 Count | 41 Count | 0 VDC | 0 VDC |
| 1741778247 | 42 Count | 367 Count | 37 Count | 0 VDC | 0 VDC |
| 1741776445 | 36 Count | 306 Count | 32 Count | 0 VDC | 0 VDC |
| 1741774644 | 30 Count | 258 Count | 27 Count | 0 VDC | 0 VDC |
| 1741772844 | 21 Count | 198 Count | 19 Count | 0 VDC | 0 VDC |
| 1741771043 | 11 Count | 126 Count | 10 Count | 0 VDC | 0 VDC |
| 1741769243 | 5 Count | 57 Count | 5 Count | 0 VDC | 0 VDC |
| 1741767442 | 108 Count | 1057 Count | 93 Count | 0 VDC | 0 VDC |
| 1741765641 | 96 Count | 984 Count | 82 Count | 0 VDC | 0 VDC |
| 1741763840 | 84 Count | 858 Count | 71 Count | 0 VDC | 0 VDC |
| 1741762040 | 78 Count | 782 Count | 66 Count | 0 VDC | 0 VDC |
| 1741760239 | 71 Count | 700 Count | 60 Count | 0 VDC | 0 VDC |
| 1741758438 | 65 Count | 635 Count | 55 Count | 0 VDC | 0 VDC |
| 1741756638 | 59 Count | 579 Count | 50 Count | 0 VDC | 0 VDC |
| 1741754837 | 53 Count | 515 Count | 45 Count | 0 VDC | 0 VDC |
| 1741753037 | 47 Count | 465 Count | 40 Count | 0 VDC | 0 VDC |
| 1741751236 | 41 Count | 399 Count | 35 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)