This is the latest recevied telemetry packets stored in our database for station/object SQ8RZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757888732 | 33 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1757887832 | 32 Count | 387 Count | 0 Count | 0 VDC | 0 VDC |
| 1757886931 | 30 Count | 367 Count | 0 Count | 0 VDC | 0 VDC |
| 1757886031 | 29 Count | 348 Count | 0 Count | 0 VDC | 0 VDC |
| 1757885129 | 28 Count | 329 Count | 0 Count | 0 VDC | 0 VDC |
| 1757884228 | 27 Count | 312 Count | 0 Count | 0 VDC | 0 VDC |
| 1757883328 | 25 Count | 294 Count | 0 Count | 0 VDC | 0 VDC |
| 1757882427 | 24 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1757881527 | 23 Count | 265 Count | 0 Count | 0 VDC | 0 VDC |
| 1757880626 | 22 Count | 247 Count | 0 Count | 0 VDC | 0 VDC |
| 1757879725 | 20 Count | 230 Count | 0 Count | 0 VDC | 0 VDC |
| 1757878825 | 19 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1757877924 | 18 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1757877023 | 17 Count | 185 Count | 0 Count | 0 VDC | 0 VDC |
| 1757876123 | 15 Count | 163 Count | 0 Count | 0 VDC | 0 VDC |
| 1757875222 | 14 Count | 150 Count | 0 Count | 0 VDC | 0 VDC |
| 1757874322 | 13 Count | 135 Count | 0 Count | 0 VDC | 0 VDC |
| 1757873421 | 12 Count | 116 Count | 0 Count | 0 VDC | 0 VDC |
| 1757872520 | 10 Count | 99 Count | 0 Count | 0 VDC | 0 VDC |
| 1757871620 | 9 Count | 85 Count | 0 Count | 0 VDC | 0 VDC |
| 1757870719 | 8 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1757869818 | 7 Count | 57 Count | 0 Count | 0 VDC | 0 VDC |
| 1757868918 | 5 Count | 35 Count | 0 Count | 0 VDC | 0 VDC |
| 1757868017 | 4 Count | 17 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)