This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1743899208 | 129 Count | 944 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743897408 | 127 Count | 927 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743895606 | 125 Count | 903 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743893806 | 122 Count | 886 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743892005 | 117 Count | 866 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743890234 | 112 Count | 844 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743888433 | 109 Count | 823 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743886632 | 108 Count | 809 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743884832 | 105 Count | 796 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743883031 | 101 Count | 781 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743881230 | 97 Count | 759 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743879429 | 93 Count | 739 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743877629 | 89 Count | 721 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743875828 | 86 Count | 708 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1743874027 | 83 Count | 690 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743872227 | 79 Count | 662 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743870426 | 76 Count | 640 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743868625 | 73 Count | 624 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743866825 | 72 Count | 608 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743865024 | 70 Count | 593 Count | 0 Count | 4 VDC | 0 VDC |
| 1743861422 | 65 Count | 564 Count | 0 Count | 4 VDC | 0 VDC |
| 1743859622 | 60 Count | 521 Count | 0 Count | 4 VDC | 0 VDC |
| 1743857821 | 58 Count | 494 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1743856020 | 55 Count | 464 Count | 0 Count | 4 VDC | 0 VDC |
| 1743854220 | 53 Count | 459 Count | 0 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)