LoRa APRS Track Direct

☰

reset

SP9KKK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1754023932	82 Count	545 Count	77 Count
1754023031	61 Count	447 Count	58 Count
1754022130	49 Count	358 Count	47 Count
1754021229	28 Count	256 Count	27 Count
1754020328	15 Count	136 Count	15 Count
1754019427	171 Count	1004 Count	161 Count
1754018526	162 Count	919 Count	153 Count
1754017624	147 Count	833 Count	139 Count
1754016723	134 Count	752 Count	127 Count
1754015822	115 Count	658 Count	109 Count
1754014921	96 Count	569 Count	91 Count
1754014020	78 Count	443 Count	74 Count
1754013119	65 Count	368 Count	62 Count
1754012217	46 Count	279 Count	44 Count
1754011316	32 Count	191 Count	31 Count
1754010415	15 Count	95 Count	15 Count
1754009514	172 Count	1036 Count	162 Count
1754008613	157 Count	941 Count	148 Count
1754007712	143 Count	854 Count	135 Count
1754006811	127 Count	747 Count	120 Count
1754005910	109 Count	665 Count	103 Count
1754005010	90 Count	577 Count	85 Count
1754004109	75 Count	489 Count	71 Count
1754003208	59 Count	400 Count	56 Count
1754002307	41 Count	304 Count	39 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by I8FUC, based on APRS Track Direct