This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751352906 | 660 Count | 536 Count | 342 Count | 0 VDC | 0 VDC |
| 1751352005 | 658 Count | 535 Count | 341 Count | 0 VDC | 0 VDC |
| 1751349303 | 649 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751348402 | 648 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751347501 | 647 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751346600 | 646 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751345699 | 645 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751344798 | 644 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751343897 | 643 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751342996 | 642 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751342096 | 641 Count | 529 Count | 335 Count | 0 VDC | 0 VDC |
| 1751341195 | 631 Count | 520 Count | 326 Count | 0 VDC | 0 VDC |
| 1751340294 | 627 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751339393 | 626 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751338492 | 625 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751337591 | 624 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751336690 | 623 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751335789 | 622 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751334888 | 621 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751333987 | 620 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751333087 | 619 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751332186 | 618 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751331285 | 617 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751330384 | 616 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
| 1751329483 | 615 Count | 517 Count | 323 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)