This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754120006 | 37 Count | 52 Count | 37 Count | 4.4 VDC | 0 VDC |
| 1754118205 | 782 Count | 1034 Count | 757 Count | 4.39 VDC | 0 VDC |
| 1754116404 | 696 Count | 940 Count | 673 Count | 4.38 VDC | 0 VDC |
| 1754114603 | 658 Count | 890 Count | 637 Count | 4.42 VDC | 0 VDC |
| 1754112803 | 604 Count | 807 Count | 584 Count | 4.42 VDC | 0 VDC |
| 1754111002 | 570 Count | 764 Count | 551 Count | 4.42 VDC | 0 VDC |
| 1754109202 | 539 Count | 720 Count | 521 Count | 4.38 VDC | 0 VDC |
| 1754107401 | 507 Count | 671 Count | 490 Count | 4.4 VDC | 0 VDC |
| 1754105600 | 478 Count | 634 Count | 462 Count | 4.4 VDC | 0 VDC |
| 1754103799 | 445 Count | 591 Count | 430 Count | 4.38 VDC | 0 VDC |
| 1754101998 | 415 Count | 552 Count | 401 Count | 4.4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)