This is the latest recevied telemetry packets stored in our database for station/object SP2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758118700 | 328 Count | 797 Count | 321 Count | 0 VDC | 0 VDC |
| 1758116899 | 298 Count | 694 Count | 292 Count | 0 VDC | 0 VDC |
| 1758115098 | 268 Count | 615 Count | 263 Count | 0 VDC | 0 VDC |
| 1758113298 | 229 Count | 524 Count | 225 Count | 0 VDC | 0 VDC |
| 1758111497 | 184 Count | 422 Count | 181 Count | 0 VDC | 0 VDC |
| 1758109696 | 110 Count | 299 Count | 108 Count | 0 VDC | 0 VDC |
| 1758107896 | 71 Count | 195 Count | 70 Count | 0 VDC | 0 VDC |
| 1758106095 | 44 Count | 104 Count | 44 Count | 0 VDC | 0 VDC |
| 1758104295 | 437 Count | 1042 Count | 427 Count | 0 VDC | 0 VDC |
| 1758102494 | 389 Count | 934 Count | 380 Count | 0 VDC | 0 VDC |
| 1758100693 | 355 Count | 841 Count | 347 Count | 0 VDC | 0 VDC |
| 1758098893 | 319 Count | 757 Count | 312 Count | 0 VDC | 0 VDC |
| 1758097092 | 285 Count | 670 Count | 279 Count | 0 VDC | 0 VDC |
| 1758095291 | 260 Count | 599 Count | 255 Count | 0 VDC | 0 VDC |
| 1758093491 | 231 Count | 523 Count | 227 Count | 0 VDC | 0 VDC |
| 1758091690 | 187 Count | 427 Count | 184 Count | 0 VDC | 0 VDC |
| 1758089890 | 125 Count | 320 Count | 123 Count | 0 VDC | 0 VDC |
| 1758088089 | 76 Count | 202 Count | 75 Count | 0 VDC | 0 VDC |
| 1758086288 | 30 Count | 86 Count | 30 Count | 0 VDC | 0 VDC |
| 1758084488 | 530 Count | 1067 Count | 511 Count | 0 VDC | 0 VDC |
| 1758082687 | 490 Count | 967 Count | 472 Count | 0 VDC | 0 VDC |
| 1758080887 | 458 Count | 909 Count | 441 Count | 0 VDC | 0 VDC |
| 1758079085 | 428 Count | 855 Count | 412 Count | 0 VDC | 0 VDC |
| 1758077285 | 398 Count | 796 Count | 383 Count | 0 VDC | 0 VDC |
| 1758075484 | 354 Count | 728 Count | 340 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)