This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761551870 | 15 Count | 39 Count | 15 Count | 0 VDC | 0 VDC |
| 1761548269 | 215 Count | 992 Count | 174 Count | 0 VDC | 0 VDC |
| 1761539265 | 190 Count | 829 Count | 157 Count | 0 VDC | 0 VDC |
| 1761537465 | 184 Count | 795 Count | 152 Count | 0 VDC | 0 VDC |
| 1761530270 | 156 Count | 663 Count | 132 Count | 0 VDC | 0 VDC |
| 1761526668 | 143 Count | 592 Count | 121 Count | 0 VDC | 0 VDC |
| 1761524867 | 137 Count | 563 Count | 116 Count | 0 VDC | 0 VDC |
| 1761523067 | 129 Count | 532 Count | 110 Count | 0 VDC | 0 VDC |
| 1761521266 | 123 Count | 495 Count | 105 Count | 0 VDC | 0 VDC |
| 1761519465 | 115 Count | 457 Count | 98 Count | 0 VDC | 0 VDC |
| 1761515864 | 102 Count | 400 Count | 87 Count | 0 VDC | 0 VDC |
| 1761514063 | 96 Count | 371 Count | 82 Count | 0 VDC | 0 VDC |
| 1761512262 | 79 Count | 339 Count | 66 Count | 0 VDC | 0 VDC |
| 1761508669 | 63 Count | 282 Count | 56 Count | 0 VDC | 0 VDC |
| 1761505067 | 49 Count | 227 Count | 44 Count | 0 VDC | 0 VDC |
| 1761501465 | 36 Count | 158 Count | 33 Count | 0 VDC | 0 VDC |
| 1761499665 | 29 Count | 113 Count | 27 Count | 0 VDC | 0 VDC |
| 1761497864 | 23 Count | 79 Count | 22 Count | 0 VDC | 0 VDC |
| 1761496063 | 12 Count | 39 Count | 12 Count | 0 VDC | 0 VDC |
| 1761494262 | 290 Count | 1017 Count | 211 Count | 0 VDC | 0 VDC |
| 1761490661 | 273 Count | 946 Count | 196 Count | 0 VDC | 0 VDC |
| 1761487068 | 252 Count | 884 Count | 183 Count | 0 VDC | 0 VDC |
| 1761485275 | 241 Count | 845 Count | 175 Count | 0 VDC | 0 VDC |
| 1761483467 | 229 Count | 805 Count | 166 Count | 0 VDC | 0 VDC |
| 1761479865 | 189 Count | 724 Count | 132 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)