This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757816486 | 945 Count | 975 Count | 770 Count | 0 VDC | 0 VDC |
| 1757815586 | 941 Count | 972 Count | 767 Count | 0 VDC | 0 VDC |
| 1757814685 | 936 Count | 968 Count | 763 Count | 0 VDC | 0 VDC |
| 1757813784 | 933 Count | 966 Count | 761 Count | 0 VDC | 0 VDC |
| 1757812884 | 929 Count | 963 Count | 758 Count | 0 VDC | 0 VDC |
| 1757811982 | 921 Count | 956 Count | 751 Count | 0 VDC | 0 VDC |
| 1757811081 | 909 Count | 945 Count | 740 Count | 0 VDC | 0 VDC |
| 1757810181 | 901 Count | 938 Count | 733 Count | 0 VDC | 0 VDC |
| 1757809280 | 896 Count | 934 Count | 729 Count | 0 VDC | 0 VDC |
| 1757808379 | 891 Count | 930 Count | 725 Count | 0 VDC | 0 VDC |
| 1757807479 | 887 Count | 927 Count | 722 Count | 0 VDC | 0 VDC |
| 1757806578 | 882 Count | 923 Count | 718 Count | 0 VDC | 0 VDC |
| 1757805677 | 878 Count | 920 Count | 715 Count | 0 VDC | 0 VDC |
| 1757804777 | 874 Count | 917 Count | 712 Count | 0 VDC | 0 VDC |
| 1757803876 | 869 Count | 913 Count | 708 Count | 0 VDC | 0 VDC |
| 1757802975 | 863 Count | 908 Count | 703 Count | 0 VDC | 0 VDC |
| 1757802075 | 854 Count | 900 Count | 695 Count | 0 VDC | 0 VDC |
| 1757801174 | 848 Count | 895 Count | 690 Count | 0 VDC | 0 VDC |
| 1757800273 | 841 Count | 889 Count | 684 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)