This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757393424 | 146 Count | 924 Count | 69 Count | 4.33 VDC | 0 VDC |
| 1757392823 | 144 Count | 911 Count | 68 Count | 4.31 VDC | 0 VDC |
| 1757392222 | 142 Count | 892 Count | 67 Count | 4.29 VDC | 0 VDC |
| 1757391622 | 140 Count | 869 Count | 66 Count | 4.32 VDC | 0 VDC |
| 1757391021 | 138 Count | 853 Count | 65 Count | 4.28 VDC | 0 VDC |
| 1757390420 | 136 Count | 845 Count | 64 Count | 4.32 VDC | 0 VDC |
| 1757389820 | 134 Count | 836 Count | 63 Count | 4.27 VDC | 0 VDC |
| 1757389219 | 132 Count | 826 Count | 62 Count | 4.31 VDC | 0 VDC |
| 1757388618 | 130 Count | 814 Count | 61 Count | 4.29 VDC | 0 VDC |
| 1757388018 | 128 Count | 801 Count | 60 Count | 4.29 VDC | 0 VDC |
| 1757387417 | 126 Count | 785 Count | 59 Count | 4.33 VDC | 0 VDC |
| 1757386817 | 124 Count | 774 Count | 58 Count | 4.27 VDC | 0 VDC |
| 1757386217 | 122 Count | 755 Count | 57 Count | 4.26 VDC | 0 VDC |
| 1757385615 | 120 Count | 736 Count | 56 Count | 4.31 VDC | 0 VDC |
| 1757385014 | 118 Count | 724 Count | 55 Count | 4.25 VDC | 0 VDC |
| 1757384413 | 116 Count | 715 Count | 54 Count | 4.32 VDC | 0 VDC |
| 1757383813 | 114 Count | 700 Count | 53 Count | 4.33 VDC | 0 VDC |
| 1757383212 | 112 Count | 691 Count | 52 Count | 4.25 VDC | 0 VDC |
| 1757382611 | 110 Count | 675 Count | 51 Count | 4.26 VDC | 0 VDC |
| 1757382011 | 108 Count | 663 Count | 50 Count | 4.3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)