This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758149228 | 12 Count | 13 Count | 10 Count | 0 VDC | 0 VDC |
| 1758145628 | 9 Count | 10 Count | 8 Count | 0 VDC | 0 VDC |
| 1758142027 | 6 Count | 7 Count | 6 Count | 0 VDC | 0 VDC |
| 1758138425 | 1001 Count | 990 Count | 723 Count | 0 VDC | 0 VDC |
| 1758044846 | 907 Count | 896 Count | 655 Count | 0 VDC | 0 VDC |
| 1758041245 | 904 Count | 893 Count | 653 Count | 0 VDC | 0 VDC |
| 1758037645 | 901 Count | 890 Count | 651 Count | 0 VDC | 0 VDC |
| 1758034044 | 898 Count | 887 Count | 649 Count | 0 VDC | 0 VDC |
| 1758030443 | 891 Count | 880 Count | 643 Count | 0 VDC | 0 VDC |
| 1758026842 | 888 Count | 877 Count | 641 Count | 0 VDC | 0 VDC |
| 1758023240 | 885 Count | 874 Count | 639 Count | 0 VDC | 0 VDC |
| 1758019639 | 882 Count | 871 Count | 637 Count | 0 VDC | 0 VDC |
| 1758016038 | 879 Count | 868 Count | 635 Count | 0 VDC | 0 VDC |
| 1758012438 | 876 Count | 865 Count | 633 Count | 0 VDC | 0 VDC |
| 1758008836 | 869 Count | 858 Count | 627 Count | 0 VDC | 0 VDC |
| 1758005236 | 866 Count | 856 Count | 625 Count | 0 VDC | 0 VDC |
| 1758001635 | 863 Count | 853 Count | 623 Count | 0 VDC | 0 VDC |
| 1757998034 | 860 Count | 850 Count | 621 Count | 0 VDC | 0 VDC |
| 1757994433 | 857 Count | 847 Count | 619 Count | 0 VDC | 0 VDC |
| 1757990832 | 854 Count | 844 Count | 617 Count | 0 VDC | 0 VDC |
| 1757987232 | 847 Count | 837 Count | 611 Count | 0 VDC | 0 VDC |
| 1757983631 | 844 Count | 834 Count | 609 Count | 0 VDC | 0 VDC |
| 1757980029 | 841 Count | 831 Count | 607 Count | 0 VDC | 0 VDC |
| 1757976428 | 838 Count | 828 Count | 605 Count | 0 VDC | 0 VDC |
| 1757972827 | 835 Count | 825 Count | 603 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)