This is the latest recevied telemetry packets stored in our database for station/object SR2SAT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754120384 | 195 Count | 608 Count | 127 Count | 0 VDC | 0 VDC |
| 1754118583 | 193 Count | 599 Count | 126 Count | 0 VDC | 0 VDC |
| 1754116782 | 191 Count | 589 Count | 125 Count | 0 VDC | 0 VDC |
| 1754114982 | 189 Count | 580 Count | 124 Count | 0 VDC | 0 VDC |
| 1754113181 | 187 Count | 571 Count | 123 Count | 0 VDC | 0 VDC |
| 1754107779 | 182 Count | 553 Count | 121 Count | 0 VDC | 0 VDC |
| 1754100583 | 169 Count | 535 Count | 116 Count | 0 VDC | 0 VDC |
| 1754096982 | 162 Count | 519 Count | 111 Count | 0 VDC | 0 VDC |
| 1754095181 | 158 Count | 508 Count | 108 Count | 0 VDC | 0 VDC |
| 1754093381 | 153 Count | 500 Count | 104 Count | 0 VDC | 0 VDC |
| 1754091580 | 149 Count | 491 Count | 101 Count | 0 VDC | 0 VDC |
| 1754089780 | 145 Count | 482 Count | 98 Count | 0 VDC | 0 VDC |
| 1754087979 | 141 Count | 472 Count | 95 Count | 0 VDC | 0 VDC |
| 1754086178 | 137 Count | 464 Count | 92 Count | 0 VDC | 0 VDC |
| 1754084378 | 133 Count | 451 Count | 89 Count | 0 VDC | 0 VDC |
| 1754082577 | 129 Count | 441 Count | 86 Count | 0 VDC | 0 VDC |
| 1754080777 | 125 Count | 431 Count | 83 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)