This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757805787 | 367 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757803984 | 366 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757802181 | 365 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757800378 | 362 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757798575 | 361 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757796771 | 360 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757794968 | 359 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757793165 | 356 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757791362 | 355 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757789559 | 354 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757787756 | 353 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757785953 | 350 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757784150 | 349 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757782347 | 348 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757780544 | 347 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757778741 | 344 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757776938 | 343 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757775135 | 342 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757773332 | 341 Count | 220 Count | 197 Count | 0 VDC | 0 VDC |
| 1757771529 | 337 Count | 219 Count | 196 Count | 0 VDC | 0 VDC |
| 1757769725 | 336 Count | 219 Count | 196 Count | 0 VDC | 0 VDC |
| 1757767922 | 332 Count | 217 Count | 194 Count | 0 VDC | 0 VDC |
| 1757766118 | 329 Count | 213 Count | 192 Count | 0 VDC | 0 VDC |
| 1757764315 | 326 Count | 213 Count | 192 Count | 0 VDC | 0 VDC |
| 1757762512 | 325 Count | 213 Count | 192 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)