This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761583241 | 293 Count | 836 Count | 37 Count | 0 VDC | 0 VDC |
| 1761582640 | 290 Count | 829 Count | 37 Count | 0 VDC | 0 VDC |
| 1761582039 | 288 Count | 822 Count | 37 Count | 0 VDC | 0 VDC |
| 1761581439 | 286 Count | 821 Count | 37 Count | 0 VDC | 0 VDC |
| 1761580837 | 284 Count | 816 Count | 37 Count | 0 VDC | 0 VDC |
| 1761580236 | 282 Count | 808 Count | 37 Count | 0 VDC | 0 VDC |
| 1761579635 | 280 Count | 803 Count | 37 Count | 0 VDC | 0 VDC |
| 1761579034 | 278 Count | 796 Count | 37 Count | 0 VDC | 0 VDC |
| 1761578433 | 276 Count | 785 Count | 37 Count | 0 VDC | 0 VDC |
| 1761577833 | 274 Count | 781 Count | 37 Count | 0 VDC | 0 VDC |
| 1761577232 | 272 Count | 774 Count | 37 Count | 0 VDC | 0 VDC |
| 1761576631 | 269 Count | 761 Count | 36 Count | 0 VDC | 0 VDC |
| 1761576030 | 267 Count | 757 Count | 36 Count | 0 VDC | 0 VDC |
| 1761574829 | 261 Count | 747 Count | 36 Count | 0 VDC | 0 VDC |
| 1761574228 | 259 Count | 742 Count | 36 Count | 0 VDC | 0 VDC |
| 1761573628 | 255 Count | 735 Count | 36 Count | 0 VDC | 0 VDC |
| 1761573026 | 253 Count | 729 Count | 36 Count | 0 VDC | 0 VDC |
| 1761571824 | 249 Count | 718 Count | 36 Count | 0 VDC | 0 VDC |
| 1761571224 | 247 Count | 710 Count | 36 Count | 0 VDC | 0 VDC |
| 1761570623 | 245 Count | 707 Count | 36 Count | 0 VDC | 0 VDC |
| 1761570022 | 243 Count | 703 Count | 36 Count | 0 VDC | 0 VDC |
| 1761569421 | 240 Count | 695 Count | 36 Count | 0 VDC | 0 VDC |
| 1761568821 | 238 Count | 688 Count | 36 Count | 0 VDC | 0 VDC |
| 1761568220 | 235 Count | 685 Count | 36 Count | 0 VDC | 0 VDC |
| 1761567619 | 233 Count | 677 Count | 36 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)