This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1753972534 | 409 Count | 804 Count | 254 Count | 4.28 VDC | 0 VDC |
| 1753970607 | 406 Count | 794 Count | 253 Count | 4.28 VDC | 0 VDC |
| 1753968681 | 393 Count | 775 Count | 242 Count | 4.28 VDC | 0 VDC |
| 1753968269 | 388 Count | 771 Count | 242 Count | 4.28 VDC | 0 VDC |
| 1753966342 | 386 Count | 761 Count | 242 Count | 4.28 VDC | 0 VDC |
| 1753964416 | 384 Count | 752 Count | 242 Count | 4.28 VDC | 0 VDC |
| 1753962490 | 377 Count | 739 Count | 237 Count | 4.28 VDC | 0 VDC |
| 1753960563 | 373 Count | 728 Count | 235 Count | 4.28 VDC | 0 VDC |
| 1753958637 | 370 Count | 718 Count | 234 Count | 4.28 VDC | 0 VDC |
| 1753956710 | 367 Count | 701 Count | 233 Count | 4.29 VDC | 0 VDC |
| 1753954784 | 364 Count | 694 Count | 232 Count | 4.28 VDC | 0 VDC |
| 1753952857 | 356 Count | 677 Count | 226 Count | 4.28 VDC | 0 VDC |
| 1753950931 | 353 Count | 668 Count | 225 Count | 4.29 VDC | 0 VDC |
| 1753949005 | 331 Count | 637 Count | 205 Count | 4.29 VDC | 0 VDC |
| 1753947078 | 325 Count | 624 Count | 201 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)