This is the latest recevied telemetry packets stored in our database for station/object IK2XR0-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1752386272 | 564 Count | 710 Count | 0 Count | 0 VDC | 0 VDC |
| 1752384464 | 562 Count | 708 Count | 0 Count | 0 VDC | 0 VDC |
| 1752382655 | 560 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1752380847 | 558 Count | 704 Count | 0 Count | 0 VDC | 0 VDC |
| 1752379038 | 556 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
| 1752377229 | 554 Count | 700 Count | 0 Count | 0 VDC | 0 VDC |
| 1752375421 | 552 Count | 698 Count | 0 Count | 0 VDC | 0 VDC |
| 1752373612 | 550 Count | 696 Count | 0 Count | 0 VDC | 0 VDC |
| 1752371804 | 548 Count | 694 Count | 0 Count | 0 VDC | 0 VDC |
| 1752369995 | 546 Count | 692 Count | 0 Count | 0 VDC | 0 VDC |
| 1752368187 | 544 Count | 690 Count | 0 Count | 0 VDC | 0 VDC |
| 1752366379 | 542 Count | 688 Count | 0 Count | 0 VDC | 0 VDC |
| 1752364570 | 540 Count | 686 Count | 0 Count | 0 VDC | 0 VDC |
| 1752362762 | 538 Count | 684 Count | 0 Count | 0 VDC | 0 VDC |
| 1752360953 | 536 Count | 682 Count | 0 Count | 0 VDC | 0 VDC |
| 1752359145 | 534 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1752357336 | 532 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1752355528 | 530 Count | 676 Count | 0 Count | 0 VDC | 0 VDC |
| 1752353720 | 528 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1752351911 | 526 Count | 672 Count | 0 Count | 0 VDC | 0 VDC |
| 1752350103 | 524 Count | 670 Count | 0 Count | 0 VDC | 0 VDC |
| 1752348294 | 522 Count | 668 Count | 0 Count | 0 VDC | 0 VDC |
| 1752346486 | 520 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1752344677 | 518 Count | 663 Count | 0 Count | 0 VDC | 0 VDC |
| 1752342869 | 516 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)