This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754305753 | 336 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1754305453 | 335 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1754305152 | 334 Count | 664 Count | 0 Count | 0 VDC | 0 VDC |
| 1754304852 | 333 Count | 663 Count | 0 Count | 0 VDC | 0 VDC |
| 1754304551 | 332 Count | 659 Count | 0 Count | 0 VDC | 0 VDC |
| 1754304250 | 331 Count | 658 Count | 0 Count | 0 VDC | 0 VDC |
| 1754303950 | 330 Count | 657 Count | 0 Count | 0 VDC | 0 VDC |
| 1754303649 | 329 Count | 653 Count | 0 Count | 0 VDC | 0 VDC |
| 1754303349 | 328 Count | 652 Count | 0 Count | 0 VDC | 0 VDC |
| 1754303048 | 327 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1754302747 | 326 Count | 647 Count | 0 Count | 0 VDC | 0 VDC |
| 1754302447 | 325 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1754302146 | 324 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1754301846 | 323 Count | 642 Count | 0 Count | 0 VDC | 0 VDC |
| 1754301545 | 322 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1754301245 | 321 Count | 640 Count | 0 Count | 0 VDC | 0 VDC |
| 1754300944 | 320 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1754300643 | 319 Count | 635 Count | 0 Count | 0 VDC | 0 VDC |
| 1754300343 | 318 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1754300042 | 317 Count | 630 Count | 0 Count | 0 VDC | 0 VDC |
| 1754299742 | 316 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1754299441 | 315 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1754299141 | 314 Count | 624 Count | 0 Count | 0 VDC | 0 VDC |
| 1754298840 | 313 Count | 623 Count | 0 Count | 0 VDC | 0 VDC |
| 1754298539 | 312 Count | 622 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)