This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754182085 | 319 Count | 667 Count | 266 Count | 4.08 VDC | 0 VDC |
| 1754180286 | 315 Count | 649 Count | 263 Count | 4.08 VDC | 0 VDC |
| 1754178487 | 310 Count | 627 Count | 259 Count | 4.08 VDC | 0 VDC |
| 1754176689 | 303 Count | 607 Count | 253 Count | 4.08 VDC | 0 VDC |
| 1754174890 | 295 Count | 586 Count | 246 Count | 4.09 VDC | 0 VDC |
| 1754173092 | 288 Count | 568 Count | 240 Count | 4.09 VDC | 0 VDC |
| 1754171294 | 281 Count | 550 Count | 234 Count | 4.09 VDC | 0 VDC |
| 1754169495 | 275 Count | 534 Count | 229 Count | 4.1 VDC | 0 VDC |
| 1754167697 | 268 Count | 514 Count | 223 Count | 4.1 VDC | 0 VDC |
| 1754165899 | 261 Count | 496 Count | 217 Count | 4.1 VDC | 0 VDC |
| 1754164100 | 255 Count | 484 Count | 212 Count | 4.1 VDC | 0 VDC |
| 1754162301 | 247 Count | 468 Count | 205 Count | 4.1 VDC | 0 VDC |
| 1754160504 | 241 Count | 458 Count | 200 Count | 4.1 VDC | 1.06 VDC |
| 1754158706 | 234 Count | 445 Count | 194 Count | 4.1 VDC | 5.54 VDC |
| 1754156908 | 227 Count | 434 Count | 188 Count | 4.11 VDC | 5.54 VDC |
| 1754155111 | 220 Count | 426 Count | 182 Count | 4.11 VDC | 5.56 VDC |
| 1754153313 | 214 Count | 419 Count | 177 Count | 4.11 VDC | 5.56 VDC |
| 1754151516 | 208 Count | 413 Count | 172 Count | 4.11 VDC | 5.56 VDC |
| 1754149718 | 202 Count | 407 Count | 167 Count | 4.11 VDC | 5.56 VDC |
| 1754147919 | 196 Count | 401 Count | 162 Count | 4.12 VDC | 5.56 VDC |
| 1754146120 | 190 Count | 395 Count | 157 Count | 4.12 VDC | 5.56 VDC |
| 1754144323 | 184 Count | 389 Count | 152 Count | 4.12 VDC | 5.56 VDC |
| 1754142524 | 178 Count | 383 Count | 147 Count | 4.12 VDC | 5.56 VDC |
| 1754140727 | 172 Count | 377 Count | 142 Count | 4.13 VDC | 5.58 VDC |
| 1754138929 | 166 Count | 371 Count | 137 Count | 4.13 VDC | 5.56 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)