This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751412616 | 316 Count | 745 Count | 252 Count | 2.55 VDC | 0 VDC |
| 1751411715 | 315 Count | 744 Count | 252 Count | 2.51 VDC | 0 VDC |
| 1751410814 | 313 Count | 714 Count | 251 Count | 2.4 VDC | 0 VDC |
| 1751409914 | 312 Count | 714 Count | 251 Count | 2.46 VDC | 0 VDC |
| 1751409013 | 311 Count | 712 Count | 251 Count | 2.65 VDC | 0 VDC |
| 1751408112 | 310 Count | 707 Count | 251 Count | 2.36 VDC | 0 VDC |
| 1751407211 | 306 Count | 674 Count | 249 Count | 2.54 VDC | 0 VDC |
| 1751406310 | 305 Count | 644 Count | 249 Count | 2.47 VDC | 0 VDC |
| 1751405409 | 304 Count | 640 Count | 249 Count | 2.51 VDC | 0 VDC |
| 1751404508 | 300 Count | 617 Count | 246 Count | 2.61 VDC | 0 VDC |
| 1751403607 | 299 Count | 614 Count | 246 Count | 2.6 VDC | 0 VDC |
| 1751402707 | 298 Count | 613 Count | 246 Count | 2.74 VDC | 0 VDC |
| 1751401806 | 284 Count | 595 Count | 233 Count | 2.48 VDC | 0 VDC |
| 1751400905 | 275 Count | 584 Count | 225 Count | 2.67 VDC | 0 VDC |
| 1751400004 | 268 Count | 573 Count | 219 Count | 2.79 VDC | 0 VDC |
| 1751399104 | 259 Count | 562 Count | 211 Count | 2.81 VDC | 0 VDC |
| 1751398203 | 250 Count | 551 Count | 203 Count | 2.64 VDC | 0 VDC |
| 1751397302 | 241 Count | 541 Count | 195 Count | 2.71 VDC | 0 VDC |
| 1751396401 | 234 Count | 532 Count | 189 Count | 2.88 VDC | 0 VDC |
| 1751395501 | 227 Count | 523 Count | 183 Count | 3.05 VDC | 0 VDC |
| 1751394600 | 215 Count | 507 Count | 172 Count | 2.93 VDC | 0 VDC |
| 1751393699 | 206 Count | 498 Count | 164 Count | 2.99 VDC | 0 VDC |
| 1751392798 | 197 Count | 486 Count | 156 Count | 2.97 VDC | 0 VDC |
| 1751391897 | 186 Count | 472 Count | 146 Count | 3.05 VDC | 0 VDC |
| 1751390996 | 177 Count | 454 Count | 138 Count | 3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)