This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751322917 | 2 Count | 3 Count | 2 Count | 0 VDC | 0 VDC |
| 1751322013 | 887 Count | 1002 Count | 587 Count | 0 VDC | 0 VDC |
| 1751321110 | 884 Count | 999 Count | 585 Count | 0 VDC | 0 VDC |
| 1751320206 | 881 Count | 995 Count | 583 Count | 0 VDC | 0 VDC |
| 1751319302 | 878 Count | 992 Count | 581 Count | 0 VDC | 0 VDC |
| 1751318399 | 875 Count | 988 Count | 579 Count | 0 VDC | 0 VDC |
| 1751317495 | 872 Count | 984 Count | 577 Count | 0 VDC | 0 VDC |
| 1751316591 | 869 Count | 981 Count | 575 Count | 0 VDC | 0 VDC |
| 1751315687 | 866 Count | 977 Count | 573 Count | 0 VDC | 0 VDC |
| 1751314784 | 863 Count | 973 Count | 571 Count | 0 VDC | 0 VDC |
| 1751313880 | 860 Count | 969 Count | 569 Count | 0 VDC | 0 VDC |
| 1751312976 | 857 Count | 965 Count | 567 Count | 0 VDC | 0 VDC |
| 1751312073 | 855 Count | 962 Count | 566 Count | 0 VDC | 0 VDC |
| 1751311169 | 852 Count | 958 Count | 564 Count | 0 VDC | 0 VDC |
| 1751310265 | 848 Count | 954 Count | 561 Count | 0 VDC | 0 VDC |
| 1751309362 | 845 Count | 951 Count | 559 Count | 0 VDC | 0 VDC |
| 1751308458 | 842 Count | 949 Count | 557 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)